Combined nomograms for calculating the bearing capacity and reinforcement of high-strength and normal concrete RC columns

Abstract

Purpose

This paper aims to obtain a calculation method by hand without iteration.

Design/methodology/approach

This paper adopts strains as known quantities to solve the internal forces and deformations of the section, simplifies the deflection curve of the column and obtains nomograms that can calculate the bearing capacity and reinforcement of circular reinforced concrete (RC) columns by hand.

Findings

Nomograms include five variables: mechanical reinforcement ratio, relative normal force, dimensionless bending moment, slenderness ratio and ultimate dimensionless curvature. Nomograms corresponding to all classes of concrete have been drawn, and their dimensionless form makes them widely applicable. The calculation results of nomograms are compared and analysed with numerical calculation results, and the difference is within 5%, meeting the engineering requirements.

Originality/value

Calculating the bearing capacity of compression bending components requires considering second-order effects. Therefore, the calculation of the bearing capacity of circular RC columns requires iterative calculation, as it includes dual nonlinearity of material and geometry, and the two are coupled with each other. To calculate the bearing capacity of the section adopting ordinary concrete, it is necessary to solve the transcendental equation iteratively. For high-strength concrete, it can only be solved by numerical integration. A fast calculation method by hand is proposed in this paper.

Citation

Li, L. and Zhou, D.-h. (2024), "Combined nomograms for calculating the bearing capacity and reinforcement of high-strength and normal concrete RC columns", International Journal of Structural Integrity, Vol. 15 No. 4, pp. 687-701. https://doi.org/10.1108/IJSI-12-2023-0146