Improvement in head blast-protection via the use of polyurea-augmented advanced combat helmet: Experimental investigation and computational analysis

Abstract

Purpose

The purpose of this paper is to optimize the design of the advanced combat helmet (ACH) currently in use, by its designers in order to attain maximum protection against ballistic impacts (fragments, shrapnel, etc.) and hard-surface/head collisions. Since traumatic brain injury experienced by a significant fraction of the soldiers returning from the recent conflicts is associated with their exposure to blast, the ACH should be redesigned in order to provide the necessary level of protection against blast loads. In the present work, augmentations of the ACH for improved blast protections are considered. These augmentations include the use of a polyurea (a nano-segregated elastomeric copolymer)-based ACH external coating/internal lining.

Design/methodology/approach

To demonstrate the efficacy of this approach, instrumented (unprotected, standard-ACH-protected, and augmented-ACH-protected) head-mannequin blast experiments are carried out. These experimental efforts are complemented with the appropriate combined Eulerian/Lagrangian transient non-linear dynamics computational fluid/solid interaction analysis.

Findings

The results obtained indicated that: when the extent of peak over-pressure reduction is used as a measure of the blast-mitigation effectiveness, polyurea-based augmentations do not noticeably improve, and sometimes slightly worsen, the performance of the standard ACH; when the extent of specific impulse reduction is used as a measure of the blast-mitigation effectiveness, application of the polyurea external coating to the standard ACH improves the blast-mitigation effectiveness of the helmet, particularly at shorter values of the charge-detonation standoff distance (SOD). At longer SODs, the effects of the polyurea-based ACH augmentations on the blast-mitigation efficacy of the standard ACH are inconclusive; and the use of the standard ACH significantly lowers the accelerations experienced by the skull and the intracranial matter. As far as the polyurea-based augmentations are concerned, only the internal lining at shorter SODs appears to yield additional reductions in the head accelerations.

Originality/value

To the authors’ knowledge, the present work contains the first report of a combined experimental/computational study addressing the problem of blast-mitigation by polyurea-based augmentation of ACH.

Citation

Grujicic, M., Ramaswami, S., Snipes, J., Yavari, R. and Dudt, P. (2016), "Improvement in head blast-protection via the use of polyurea-augmented advanced combat helmet: Experimental investigation and computational analysis", International Journal of Structural Integrity, Vol. 7 No. 4, pp. 516-552. https://doi.org/10.1108/IJSI-08-2015-0027