Effect of randomly dispersed short fibers on the flexural resistance factor of concrete beams reinforced with GFRP bars

Abstract

Purpose

The purpose of this paper is to investigate the potential design advantage in terms of resistance factors for normal weight concrete beams containing moderate-dose randomly dispersed short fibers and reinforced with glass fiber reinforced polymer (GFRP) bars.

Design/methodology/approach

An analytical model based on the current code specifications is used to calculate the moment capacity of over-reinforced sections. The vast majority of the considered beams are over-reinforced, compression-controlled. The data of the fiber-reinforced concrete (FRC) reinforced with GFRP bars are collected from three published research studies which are based on experimentally tested results. Three different types of short fibers with four volume fractions are considered. Probabilistic model is established to conduct reliability-based calibration using Monte-Carlo Simulation. Limit state function, relevant load and resistance random variables are identified, and adequate statistical parameters are selected. Target reliability index consistent with the one used to develop current design code specifications is used.

Findings

Reliability analysis and calibration process are carried out with the intention of estimating the flexural resistance factors for FRC beams reinforced with GFRP bars.

Originality/value

The predicted flexural resistance factors ranged from 0.72 to 0.95, giving the resistance factors the potential to be increased above the currently specified value of 0.65 for compression-controlled members reinforced with FRP bars.

Citation

Behnam, B.R. and Al-Iessa, M.M.M. (2022), "Effect of randomly dispersed short fibers on the flexural resistance factor of concrete beams reinforced with GFRP bars", International Journal of Structural Integrity, Vol. 13 No. 2, pp. 226-236. https://doi.org/10.1108/IJSI-07-2021-0069