TY - JOUR AB - Purpose The combined numerical-experimental approach has been presented. The purpose of this paper is to determine the critical rupture load of the notched components based on the cohesive zone modeling (CZM).Design/methodology/approach The 42CrMo4 steel (in normalized state) state has been tested and modeled using an eXtended finite element method (xFEM) philosophy with the CZM approach. In order to validate the numerically obtained critical load forces the experimental verification was performed.Findings The critical loads were determined for various notch configurations. The numerical and experimental values were compared. Based on this, a good agreement between experimental and numerical data is achieved. The relative error does not exceed 7 percent.Practical implications The presented procedure and approach is effective and simple for engineering applications. It is worth to underline that the obtained critical load values for notched components require only the static tensile test results and implementation of the presented route in numerical FEM, xFEM environment.Originality/value The presented methodology is actual and still developed. The scientific and engineering value of the presented numerical procedure is high. VL - 8 IS - 6 SN - 1757-9864 DO - 10.1108/IJSI-05-2017-0032 UR - https://doi.org/10.1108/IJSI-05-2017-0032 AU - Smolnicki Michal Jan AU - Ptak Michal AU - Lesiuk Grzegorz PY - 2017 Y1 - 2017/01/01 TI - Static failure load predictions in notched steel components using a combined experimental-numerical approach T2 - International Journal of Structural Integrity PB - Emerald Publishing Limited SP - 683 EP - 693 Y2 - 2024/09/24 ER -