Investigation of the quality category approach for BS7910-based rapid fatigue assessment of welded structures containing cracks
International Journal of Structural Integrity
ISSN: 1757-9864
Article publication date: 21 March 2023
Issue publication date: 26 May 2023
Abstract
Purpose
This study aims to extend the application of the quality category approach in rapid fatigue assessment of complex welded structures containing defects under arbitrary loadings, following the investigation of their core data and fatigue assessment procedures based on fracture mechanics.
Design/methodology/approach
The analysis methods and procedures for calculating equivalent sizes of semi-elliptic cracks and initial sizes of through-width cracks at the weld toe were developed based on the life equivalence principle. Different stress concentration solutions, i.e. 2D-Mk and 3D-Mk solutions, and different bending ratios were considered. Then, approximate equations were proposed to calculate the crack size under combined stress. In addition, a procedure for calculating the fatigue life by interpolation was proposed and applied to engineering examples.
Findings
The fatigue lives of fillet and butt weld joints obtained with the 3D-Mk solution for large L/B are longer than those obtained with the 2D-Mk solution. The results of the fatigue life of the brake unit bracket show that the average error between the proposed approximation equations and the quality category approach is 1.6%.
Originality/value
The quality category and equivalent size curves of different stress concentration solutions under combined membrane and bending stresses are newly added, which further expands the application of the quality category approach. When the proposed fatigue life calculation methods are employed, the remaining life can be quickly derived in addition to the qualitative conclusion on the safety of the structure. These provide the necessary conditions to perform a rapid fatigue assessment adapted to engineering purposes.
Keywords
Acknowledgements
This research was supported by The National Key Research and Development Program (No. 2020YFB1200200ZL-02).
Citation
Chen, S., Xie, S., Li, T. and Wang, J. (2023), "Investigation of the quality category approach for BS7910-based rapid fatigue assessment of welded structures containing cracks", International Journal of Structural Integrity, Vol. 14 No. 3, pp. 378-400. https://doi.org/10.1108/IJSI-01-2023-0002
Publisher
:Emerald Publishing Limited
Copyright © 2023, Emerald Publishing Limited