To read this content please select one of the options below:

Dynamic walking of humanoid robot on flat surface using amplified LIPM plus flywheel model

Abhishek Kumar Kashyap (Mechanical Engineering, National Institute of Technology Rourkela, Rourkela, India)
Dayal R. Parhi (Mechanical Engineering, National Institute of Technology Rourkela, Rourkela, India)

International Journal of Intelligent Unmanned Systems

ISSN: 2049-6427

Article publication date: 4 March 2021

Issue publication date: 22 November 2022

212

Abstract

Purpose

Humanoid robots have complicated dynamics, and they lack dynamic stability. Despite having similarities in kinematic structure, developing a humanoid robot with robust walking is quite difficult. In this paper, an attempt to produce a robust and expected walking gait is made by using an ALO (ant lion optimization) tuned linear inverted pendulum model plus flywheel (LIPM plus flywheel).

Design/methodology/approach

The LIPM plus flywheel provides the stabilized dynamic walking, which is further optimized by ALO during interaction with obstacles. It gives an ultimate turning angle, which makes the robot come closer to the obstacle and provide a turning angle that optimizes the travel length. This enhancement releases the constraint on the height of the COM (center of mass) and provides a larger stride. The framework of a sequential locomotion planer has been discussed to get the expected gait. The proposed method has been successfully tested on a simulated model and validated on the real NAO humanoid robot.

Findings

The convergence curve defends the selection of the proposed controller, and the deviation under 5% between simulation and experimental results in regards to travel length and travel time proves its robustness and efficacy. The trajectory of various joints obtained using the proposed controller is compared with the joint trajectory obtained using the default controller. The comparison shows the stable walking behavior generated by the proposed controller.

Originality/value

Humanoid robots are preferred over mobile robots because they can easily imitate the behaviors of humans and can result in higher output with higher efficiency for repetitive tasks. A controller has been developed using tuning the parameters of LIPM plus flywheel by the ALO approach and implementing it in a humanoid robot. Simulations and experiments have been performed, and joint angles for various joints are calculated and compared with the default controller. The tuned controller can be implemented in various other humanoid robots

Keywords

Citation

Kashyap, A.K. and Parhi, D.R. (2022), "Dynamic walking of humanoid robot on flat surface using amplified LIPM plus flywheel model", International Journal of Intelligent Unmanned Systems, Vol. 10 No. 4, pp. 316-329. https://doi.org/10.1108/IJIUS-09-2020-0039

Publisher

:

Emerald Publishing Limited

Copyright © 2021, Emerald Publishing Limited

Related articles