Response surface optimization of cotton tufts opening degree using Box–Behnken designs

Abstract

Purpose

This study aims to investigate the effect of process parameters of blow room machines on openness degree and quality of cotton tufts in a blow room.

Design/methodology/approach

For this purpose, an experimental Box–Behnken design (BBD) was used, and the process parameters were the angles of the grid bars underneath the opening rollers of CVT3 beaters and the distance between feed roller of the first opening roller of CVT3.

Findings

It was found that the cotton tuft openness increased by increasing the angles of grid bars and by decreasing the distance between the feed roller and first opening roller on CVT3 beater. Further, the optimization procedure showed that an optimum value of cotton tuft openness (in laser method) was determined for specific levels of the process parameters.

Originality/value

The originality of this investigation is that it showed the individual effects and interactions of the most important factors in two tufting machines instead of only one machine. This study is important because it helps cotton yarn spinners to improve the quality of the final yarns by optimizing the levels of tuft openness which in turn improves fiber cleaning.

Citation

Alkhateeb, W.J. (2021), "Response surface optimization of cotton tufts opening degree using Box–Behnken designs", International Journal of Clothing Science and Technology, Vol. 33 No. 2, pp. 254-269. https://doi.org/10.1108/IJCST-11-2019-0165