Investigation into the feasibility of inductively coupled antenna for use in smart clothing

Abstract

Purpose

This research investigated the feasibility of using an inductively coupled antenna as the basis of applying a systems approach to smart clothing. In order to simulate real-life situations, the impact of the distortions and relative displacement of different fabric layers (with affixed antennas) on the signal quality was assessed. The paper aims to discuss these issues.

Design/methodology/approach

A spiral antenna was printed on different fabric substrates. Obstructive conditions of the inductively coupled fabric layers were investigated to find out how much influence these conditions had on transmission performance. Reflected signals and transmitted signals were observed, while fabric antennas were subjected to displacement (distance and dislocation) or deformation (stretching and bending). The threshold of physical obstacles was estimated based on statistical analyses.

Findings

The limits of physical conditions that enable proper wireless transmission were estimated up to ∼2 cm for both distance and dislocation, and ∼0.24 K for bending deformation. The antenna performance remained within an acceptable level of 20 percent transmission up to 10 percent fabric stretch. Based on well-established performance metrics used in clothing environment on the body, which employs 2-5 cm of ease, the results imply that the inductively coupled antennas may be suitable for use in smart clothing.

Originality/value

This research demonstrates that the use of inductively coupled antennas on multiple clothing layers could offer the basis of a new “wireless” system approach to smart clothing. This would not only result in performance benefits, but would also significantly improve the aesthetics of smart clothing which should result in new markets for such products.

Citation

Suh, M., E. Carroll, K., Grant, E. and Oxenham, W. (2014), "Investigation into the feasibility of inductively coupled antenna for use in smart clothing", International Journal of Clothing Science and Technology, Vol. 26 No. 1, pp. 25-37. https://doi.org/10.1108/IJCST-10-2012-0064