TY - JOUR AB - Purpose This study aims to carry out numerical modeling to predict aerodynamic noise radiation from four different Savonius rotor blade profile.Design/methodology/approach Incompressible unsteady reynolds-averaged navier-stokes (URANS) approach using gamma–theta turbulence model is conducted to obtain the time accurate turbulent flow field. The Ffowcs Williams and Hawkings (FW-H) acoustic analogy formulation is used for noise predictions at optimal tip speed ratio (TSR).Findings The mean torque and power coefficients are compared with the experimental data and acceptable agreement is observed. The total and Mono+Dipole noise graphs are presented. A discrete tonal component at low frequencies in all graphs is attributed to the blade passing frequency at the given TSR. According to the noise prediction results, Bach type rotor has the lowest level of noise emission. The effect of TSR on the noise level from the Bach rotor is investigated. A direct relation between angular velocity and the noise emission is found.Practical implications The savonius rotor is a type of vertical axis wind turbines suited for mounting in the vicinity of residential areas. Also, wind turbines wherein operation are efficient sources of tonal and broadband noises and affect the inhabitable environment adversely. Therefore, the acoustic pollution assessment is essential for the installation of wind turbines in residential areas.Originality/value This study aims to investigate the radiated noise level of four common Savonius rotor blade profiles, namely, Bach type, Benesh type, semi-elliptic and conventional. As stated above, numbers of studies exploit the URANS method coupled with the FW-H analogy to predict the aeroacoustics behavior of wind turbines. Therefore, this approach is chosen in this research to deal with the aeroacoustics and aerodynamic calculation of the flow field around the aforementioned Savonius blade profiles. The effect of optimal TSR on the emitted noise and the contribution of thickness, loading and quadrupole sources are of interest in this study. VL - 30 IS - 6 SN - 0961-5539 DO - 10.1108/HFF-12-2018-0764 UR - https://doi.org/10.1108/HFF-12-2018-0764 AU - Delbari Seyed Hamid AU - Nejat Amir AU - Ahmadi Mohammad H. AU - Khaleghi Ali AU - Goodarzi Marjan PY - 2019 Y1 - 2019/01/01 TI - Numerical modeling of aeroacoustic characteristics of different savonius blade profiles T2 - International Journal of Numerical Methods for Heat & Fluid Flow PB - Emerald Publishing Limited SP - 3349 EP - 3369 Y2 - 2024/04/18 ER -