TY  - JOUR
AB  - Purpose This study aims to model the nanofluid flow in microchannel heat sinks having the same length and hydraulic diameter but different cross-sections (circular, trapezoidal and square).Design/methodology/approach The nanofluid is graphene nanoplatelets-silver/water, and the heat transfer in laminar flow was investigated. The range of coolant Reynolds number in this investigation was 200 ≤ Re ≤ 1000, and the concentrations of nano-sheets were from 0 to 0.1 vol. %.Findings Results show that higher temperature leads to smaller Nusselt number, pressure drop and pumping power, and increasing solid nano-sheet volume fraction results in an expected increase in heat transfer. However, the influence of temperature on the friction factor is insignificant. In addition, by increasing the Reynolds number, the values of pressure drop, pumping power and Nusselt number augments, but friction factor diminishes.Research limitations/implications Data extracted from a recent experimental work were used to obtain thermo-physical properties of nanofluids.Originality/value The effects of temperature, microchannel cross-section shape, the volume concentration of nanoparticles and Reynolds number on thermal and hydraulics behavior of the nanofluid were investigated. Results are presented in terms of velocity, Nusselt number, pressure drop, friction loss and pumping power in various conditions. Validation of the model against previous papers showed satisfactory agreement.
VL  - 30
IS  - 1
SN  - 0961-5539
DO  - 10.1108/HFF-12-2018-0730
UR  - https://doi.org/10.1108/HFF-12-2018-0730
AU  - Goodarzi Marjan
AU  - Tlili Iskander
AU  - Tian Zhe
AU  - Safaei Mohammad Reza
PY  - 2019
Y1  - 2019/01/01
TI  - Efficiency assessment of using graphene nanoplatelets-silver/water nanofluids in microchannel heat sinks with different cross-sections for electronics cooling
T2  - International Journal of Numerical Methods for Heat & Fluid Flow
PB  - Emerald Publishing Limited
SP  - 347
EP  - 372
Y2  - 2024/04/25
ER  -