To read this content please select one of the options below:

Unsteady conjugate heat transfer with combined effects of MHD and moving conductive elliptic object in CNT-water nanofluid with ventilation ports

Fatih Selimefendigil (Department of Mechanical Engineering, Manisa Celal Bayar University, Manisa, Turkey)
Hakan F. Öztop (Department of Mechanical Engineering, Technology Faculty, Firat University, Elazig, Turkey)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 15 May 2021

Issue publication date: 10 August 2021

120

Abstract

Purpose

The purpose of this paper is to analyze the unsteady conjugate mixed convective heat transfer characteristics in a vented porous cavity under the combined effects of moving conductive elliptic object and magnetic field.

Design/methodology/approach

The finite element method and arbitrary Lagrangian-Eulerian (ALE), impacts of Reynolds number, Hartmann number, aspect ratio of the conductive ellipse and moving speed of the object on the hydro-thermal performance are analyzed.

Findings

It was observed that the dynamic characteristics of the local and average Nu number of each hot wall are different. Magnetic field strength increment resulted in the enhancement of average Nu number for bot steady and transient case while the optimum case for best hydro-thermal performance is achieved for highest Ha number and non-dimensional time of 10. Higher value of average Nu and lower pressure coefficient are achieved for aspect ratio of 4 and non-dimensional time of 10. When the moving velocity of the conductive ellipse is considered, 42% enhancement in the average Nu is obtained at non-dimensional time of 20 and object velocity equals to 0.012 times entering fluid velocity in the negative y direction while the pressure coefficient is higher. The moving object is used as a useful tool to control the dynamic features of heat transfer in a vented cavity.

Originality/value

The present method of convective heat transfer control inside a vented cavity with a moving elliptic object is novel and can be used as an effective tool with magnetic field effects owing to diverse use of convection in cavities with vented ports in many practical thermal engineering systems.

Keywords

Acknowledgements

This study is supported by the TUBITAK (The Scientific and Technological Research Council of Turkey) under the grant no. 119M050 which is gratefully acknowledged.

Citation

Selimefendigil, F. and Öztop, H.F. (2021), "Unsteady conjugate heat transfer with combined effects of MHD and moving conductive elliptic object in CNT-water nanofluid with ventilation ports", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 31 No. 8, pp. 2484-2508. https://doi.org/10.1108/HFF-11-2020-0695

Publisher

:

Emerald Publishing Limited

Copyright © 2021, Emerald Publishing Limited

Related articles