To read this content please select one of the options below:

Impact of heat generation/absorption on heat and mass transfer of nanofluid over rotating disk filled with carbon nanotubes

Patakota Sudarsana Reddy (Department of Mathematics, Rajiv Gandhi Memorial College of Engineering and Technology, Nandyal, India)
Paluru Sreedevi (Department of Mathematics, Rajiv Gandhi Memorial College of Engineering and Technology, Nandyal, India)
Kavaturi Venkata Suryanarayana Rao (Rajeev Gandhi Memorial College of Engineering and Technology, Nandyal, India)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 28 December 2020

Issue publication date: 26 August 2021

148

Abstract

Purpose

The purpose of this paper is to know the influence of heat generation/absorption and slip effects on heat and mass transfer flow of carbon nanotubes – water-based nanofluid over a rotating disk. Two types of carbon nanotubes, single and multi-walled, are considered in this analysis.

Design/methodology/approach

The non-dimensional system of governing equations is constructed using compatible transformations. These equations together with boundary conditions are solved numerically by using the most prominent Finite element method. The influence of various pertinent parameters such as magnetic parameter (0.4 – 1.0), nanoparticle volume fraction parameter (0.1 – 0.6), porosity parameter (0.3 – 0.6), radiation parameter (0.1 – 0.4), Prandtl number (2.2 – 11.2), space-dependent (−3.0 – 3.0), temperature-dependent (−3.0 – 1.5), velocity slip parameter (0.1 – 1.0), thermal slip parameter (0.1 – 0.4) and chemical reaction parameter (0.3 – 0.6) on nanofluids velocity, temperature and concentration distributions, as well as rates of velocity, temperature and concentration is calculated and the results are plotted through graphs and tables. Also, a comparative analysis is carried out to verify the validation of the present numerical code and found good agreement.

Findings

The results indicate that the temperature of the fluid elevates with rising values of nanoparticle volume fraction parameter. Furthermore, the rates of heat transfer rise from 4.8% to 14.6% when carbon nanotubes of 0.05 volume fraction are suspended into the base fluid.

Originality/value

The work carried out in this analysis is original and no part is copied from other sources.

Keywords

Citation

Reddy, P.S., Sreedevi, P. and Suryanarayana Rao, K.V. (2021), "Impact of heat generation/absorption on heat and mass transfer of nanofluid over rotating disk filled with carbon nanotubes", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 31 No. 9, pp. 2962-2985. https://doi.org/10.1108/HFF-10-2020-0621

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles