Columnar vortex generator for flow control over a ski-jump ramp

Abstract

Purpose

Aircraft carriers are essential for modern naval operations. Takeoff maneuver is critical because of the short runway distance. The ski-jump ramp is a system which increases the angle of attack of the aircraft, so an extra lift is obtained. Regarding the flow configuration over the ski-jump ramp at ahead wind conditions, the complex aerodynamic environment generated by the ramp configuration influences aircraft operations. This flow field is mainly characterized by a low velocity recirculation bubble that reduces aircraft performances. The purpose of this paper is to find a solution to reduce these adverse effects, by means of flow control devices, which opens a wide field of research.

Design/methodology/approach

This paper presents wind tunnel tests performed to study the flow configuration in the vicinity of the ski-jump ramp and the flow control devices effects. A 1:100 scaled ship model was built to develop experimental tests by using flow control devices fabricated by means of additive manufacturing. Particle image velocimetry technique was used to measure the velocity flow field and the turbulence intensity maps.

Findings

Interesting results were obtained when the angle between the intersection of the ski-jump ramp and the columnar vortex generator (CVG) is modified. The results showed a high reduction of the recirculation bubble generated over the flight deck.

Originality/value

CVG has presented encouraging results as a passive flow control device. A study of the variation of CVG geometrical parameters has been developed.

Citation

Bardera, R., León-Calero, M. and de Nova-Trigueros, J. (2018), "Columnar vortex generator for flow control over a ski-jump ramp", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 28 No. 5, pp. 1156-1168. https://doi.org/10.1108/HFF-05-2017-0181