TY  - JOUR
AB  - Purpose Incineration has become increasingly important in many large cities around the world because of fast urbanization and population growth. The benefits of energy production and large reduction in the waste volume to landfills also contribute to its growing adaptation for solid waste management for these cities. At the same time, the environmental impact of the pollutant gases emitted from the incineration process is a common concern for various stakeholders which must be properly addressed. To minimize the pollutant gas emission levels, as well as maximize the energy efficiency, it is critically important to optimize the combustion performance of an incinerator freeboard which would require the development of reliable approaches based on computational fluid dynamics (CFD) modeling. A critical task in the CFD modeling of an incinerator furnace requires the specification of waste characteristics along the moving grate as boundary conditions, which is not available in standard CFD packages at present. This study aims to address this gap by developing a numerical incinerator waste bed model.Design/methodology/approach A one-dimensional Lagrangian model for the incineration waste bed has been developed, which can be coupled to the furnace CFD model. The changes in bed mass due to drying, pyrolysis, devolatilization and char oxidation are all included in the model. The mass and concentration of gases produced in these processes through reactions are also predicted. The one-dimensional unsteady energy equations of solid and gas phases, which account for the furnace radiation, conduction, convection and heat of reactions, are solved by the control volume method.Findings The Lagrangian model is validated by comparing its prediction with the experimental data in the literature. The predicted waste bed height reduction, temperature profile and gas concentration are in reasonable agreement with the observations.Originality/value The simplicity and efficiency of the model makes it ideally suitable to be used for coupling with the computational furnace model to be developed in future (so as to optimize incinerator designs).
VL  - 29
IS  - 2
SN  - 0961-5539
DO  - 10.1108/HFF-04-2018-0165
UR  - https://doi.org/10.1108/HFF-04-2018-0165
AU  - Lai Adrian Chun Hin
AU  - Law Adrian Wing-Keung
PY  - 2018
Y1  - 2018/01/01
TI  - Numerical modeling of municipal waste bed incineration
T2  - International Journal of Numerical Methods for Heat & Fluid Flow
PB  - Emerald Publishing Limited
SP  - 504
EP  - 522
Y2  - 2024/04/19
ER  -