Numerical analysis of the fin spacing effect on the horseshoe vortex system evolution in a two-rows finned-tube heat exchanger

Abstract

Purpose

In finned-tube heat exchangers, the array of tubes generates three-dimensional vortices at fin-tube junctions. Theses vortices known as horseshoe vortex (HSV) system are responsible of flow mixing and heat transfer increase. The purpose of this paper is to focus on the effect of the fin spacing on the formation, the spatial evolution and dissipation of the HSV system at fin-tube junctions in a two-rows finned-tube heat exchanger. The global characterisation of the heat exchanger performance is also presented.

Design/methodology/approach

The flow structure is numerically analysed through the use of computational fluid dynamics tools. The different vortices of the HSV system are highlighted and quantitatively analysed at each fin-tube junction with vorticity, wall shear stress analysis and two-dimensional streamline plots around tubes.

Findings

The results show that the primary and secondary vortices of the HSV system have antagonistic behaviors with respect to the azimuthal angle variation. The optimum fin spacing ratio E/D that generates the most intense first primary vortex in the HSV system lies between 0.20 and 0.25. Similar observation are made on the thermalhydraulic performance of the heat exchanger as j/f exhibits a maximum value for a fin spacing ratio E/D=0.25.

Research limitations/implications

A detailed URANS simulation shows that even if the flow remains steady in the core of the heat exchanger, unsteady behavior is noticed in the wake of the second tube.

Originality/value

In this study, the flow topology is quantitatively analysed in successive radial planes around heat exchanger tubes. The strong effect of the fin spacing on the HSV generation and dissipation is deeply analysed.

Citation

Voguelin Simo Tala, J., Russeil, S., Bougeard, D. and Harion, J.-L. (2013), "Numerical analysis of the fin spacing effect on the horseshoe vortex system evolution in a two-rows finned-tube heat exchanger", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 23 No. 7, pp. 1136-1154. https://doi.org/10.1108/HFF-03-2011-0059