To read this content please select one of the options below:

Genetic algorithm based cooling energy optimization of data centers

Jayati Athavale (Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia, USA)
Minami Yoda (Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia, USA)
Yogendra Joshi (Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia, USA)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 18 January 2021

Issue publication date: 15 September 2021

337

Abstract

Purpose

This study aims to present development of genetic algorithm (GA)-based framework aimed at minimizing data center cooling energy consumption by optimizing the cooling set-points while ensuring that thermal management criteria are satisfied.

Design/methodology/approach

Three key components of the developed framework include an artificial neural network-based model for rapid temperature prediction (Athavale et al., 2018a, 2019), a thermodynamic model for cooling energy estimation and GA-based optimization process. The static optimization framework informs the IT load distribution and cooling set-points in the data center room to simultaneously minimize cooling power consumption while maximizing IT load. The dynamic framework aims to minimize cooling power consumption in the data center during operation by determining most energy-efficient set-points for the cooling infrastructure while preventing temperature overshoots.

Findings

Results from static optimization framework indicate that among the three levels (room, rack and row) of IT load distribution granularity, Rack-level distribution consumes the least cooling power. A test case of 7.5 h implementing dynamic optimization demonstrated a reduction in cooling energy consumption between 21%–50% depending on current operation of data center.

Research limitations/implications

The temperature prediction model used being data-driven, is specific to the lab configuration considered in this study and cannot be directly applied to other scenarios. However, the overall framework can be generalized.

Practical implications

The developed framework can be implemented in data centers to optimize operation of cooling infrastructure and reduce energy consumption.

Originality/value

This paper presents a holistic framework for improving energy efficiency of data centers which is of critical value given the high (and increasing) energy consumption by these facilities.

Keywords

Acknowledgements

The authors acknowledge support by the National Science Foundation Center for Energy-Smart Electronic Systems (ES2) and the John M. McKenney and Warren D. Shiver Distinguished Chair in Building Mechanical Systems Funds.

Citation

Athavale, J., Yoda, M. and Joshi, Y. (2021), "Genetic algorithm based cooling energy optimization of data centers", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 31 No. 10, pp. 3148-3168. https://doi.org/10.1108/HFF-01-2020-0036

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles