TY - JOUR AB - Purpose– In engineering applications, gas-solid two-phase reaction flow with multi-moving boundaries is a common phenomenon. The launch process of multiple projectiles is a typical example. The flow of adjacent powder chambers is coupled by projectile’s motion. The purpose of this paper is to study this flow by numerical simulation. Design/methodology/approach– A one-dimensional two-phase reaction flow model and MacCormack difference scheme are implemented in a computational code, and the code is used to simulate the launch process of a system of multiple projectiles. For different launching rates and loading conditions, the simulated results of the launch process of three projectiles are obtained and discussed. Findings– At low launching rates, projectiles fired earlier in the series have little effect on the launch processes of projectiles fired later. However, at higher launching rates, the projectiles fired first have a great influence on the launch processes of projectiles fired later. As the launching rate increases, the maximum breech pressure for the later projectiles increases. Although the muzzle velocities increase initially, they reach a maximum at some launching rate, and then decrease rapidly. The muzzle velocities and maximum breech pressures of the three projectiles have an approximate linear relationship with the charge weight, propellant web size and chamber volume. Originality/value– This paper presents a prediction tool to understand the physical phenomenon of the gas-solid two-phase reaction flow with multi-moving boundaries, and can be used as a research tool for future interior ballistics studies of launch system of multiple projectiles. VL - 25 IS - 2 SN - 0961-5539 DO - 10.1108/HFF-01-2014-0018 UR - https://doi.org/10.1108/HFF-01-2014-0018 AU - Luo Qiao AU - Zhang Xiaobing PY - 2015 Y1 - 2015/01/01 TI - Numerical simulation of gas-solid two-phase reaction flow with multiple moving boundaries T2 - International Journal of Numerical Methods for Heat & Fluid Flow PB - Emerald Group Publishing Limited SP - 375 EP - 390 Y2 - 2024/05/11 ER -