A state space boundary element method for elasticity of functionally graded materials

Abstract

Purpose

The state space method (SSM) is good at analyzing the interfacial physical quantities in laminated materials, while it has difficulty in calculating the mechanical quantities of interior points, which can be easily evaluated by the boundary element method (BEM). However, the material has to be divided into many subdomains when the traditional BEM is applied to analyze the functionally graded material (FGM), so that the computational amount will be increased enormously. This study aims to couple these two methods to strengthen their advantages and overcome their disadvantages.

Design/methodology/approach

Herein, a state space BEM in which the SSM is coupled by the BEM is proposed to analyze the elasticity of FGMs, where one BEM domain is set and the others belong to SSM domains. The discretized elements occur only on the boundary of the BEM domain and at the interfaces between different SSM domains. In SSM domains, the horizontal interfaces of FGMs are discretized by linear elements and the variables along the vertical direction are yielded by the precise integration method.

Findings

The accuracy of the proposed method is verified by comparing the present results with the ones from the finite element method (FEM). It is found that the present method can provide accurate displacements and stresses in the FGMs by fewer freedom degrees in comparison with the FEM. In addition, the present method can provide continuous interfacial stresses at the interfaces between different material domains, while the interfacial stresses by the FEM are discontinuous.

Originality/value

The system equations of the state space BEM are built by combining the boundary integral equation with the state equations according to the continuity conditions at the interfaces. The mechanical parameters of any inner point can be evaluated by the boundary integral equation after the unknowns on the boundaries and interfaces are determined by the system equation.

Citation

Cheng, C., Han, Z., Niu, Z. and Sheng, H. (2017), "A state space boundary element method for elasticity of functionally graded materials", Engineering Computations, Vol. 34 No. 8, pp. 2614-2633. https://doi.org/10.1108/EC-10-2016-0351