Analysis and numerical solution of dynamic Jiles–Atherton model applied to hysteresis modeling for giant magnetostrictive materials

Abstract

Purpose

Owing to the excellent performance, giant magnetostrictive materials (GMMs) are widely used in many engineering fields. The dynamic Jiles–Atherton (J-A) model, derived from physical mechanism, is often used to describe the hysteresis characteristics of GMM. However, this model, despite cited by many different literature studies, seems not to possess unique expressions, which may cause great trouble to the subsequent application. This paper aims to provide the rational expressions of the dynamic J-A model and propose a numerical computation scheme to obtain the model results with high accuracy and fast speed.

Design/methodology/approach

This paper analyzes different published papers and provides a reasonable form of the dynamic J-A model based on functional properties and physical explanations. Then, a numerical computation scheme, combining the Newton method and the explicit Adams method, is designed to solve the modified model. In addition, the error source and transmission path of the numerical solution are investigated, and the influence of model parameters on the calculation error is explored. Finally, some attempts are made to study the influence of numerical scheme parameters on the accuracy and time of the computation process. Subsequently, an optimization procedure is proposed.

Findings

A rational form of the dynamic J-A model is concluded in this paper. Using the proposed numerical calculation scheme, the maximum calculation error, while computing the modified model, can remain below 2 A/m under different model parameter combinations, and the computation time is always less than 0.5 s. After optimization, the calculation speed can be enhanced with the computation accuracy guaranteed.

Originality/value

To the best of the authors’ knowledge, this paper is the first one trying to provide a rational form of the dynamic J-A model among different citations. No other research studies focus on designing a detailed computation scheme targeting the fast and accurate calculation of this model as well. And the performance of the proposed calculation method is validated in different conditions.

Citation

Rong, C., He, Z., Xue, G., Liu, G., Dai, B. and Zhou, Z. (2022), "Analysis and numerical solution of dynamic Jiles–Atherton model applied to hysteresis modeling for giant magnetostrictive materials", Engineering Computations, Vol. 39 No. 4, pp. 1451-1472. https://doi.org/10.1108/EC-03-2021-0141