To read this content please select one of the options below:

Using a look-up table technique and finite element calculations for quick detection of stiff inclusions in silicone rubber

Ulf G. Jonsson (Department of Applied Physics and Electronics and Centre for Biomedical Engineering and Physics, Umeå University, Umeå, Sweden)
Olof A. Lindahl (Department of Radiation Sciences and Centre for Biomedical Engineering and Physics, Umeå University, Umeå, Sweden)
Britt M. Andersson (Department of Applied Physics and Electronics and Centre for Biomedical Engineering and Physics, Umeå University, Umeå, Sweden)

Engineering Computations

ISSN: 0264-4401

Article publication date: 10 February 2020

Issue publication date: 21 May 2020

78

Abstract

Purpose

The aim of the study was to show that a new method, using a look-up table technique, can be used to detect the presence and position of an inclusion embedded in a tissue-like material. Due to the time-consuming nature of the finite element (FE) method or FEM, real-time applications involving FEM as part of a control loop, are traditionally limited to slowly varying systems. By using a simplified two-dimensional FE model and a look-up table, we show by simulations and experiments that it is possible to achieve reasonable computational times in a tactile resonance sensor application.

Design/methodology/approach

A piezoelectric disk was placed in the center of a silicone rubber disk (SRD) with viscoelastic properties, where it acted as both sensor and actuator and dissipated radial acoustic waves into the silicone. The look-up table was constructed by calculating the radial Lamb wave transition frequencies in the impedance frequency response of the sensor while varying the position of an inclusion. A position-matching algorithm was developed that matched measured and calculated Lamb wave transitions and thereby identified the presence and position of an inclusion.

Findings

In an experiment, the position of a hard inclusion was determined by measuring the Lamb transition frequencies of the first radial resonance in two SRDs. The result of the matching algorithm for Disk 1 was that the matched position was less than 3% from the expected value. For Disk 2, the matching algorithm erroneously reported two false positions before reporting a position that was less than 5% from the expected value. An explanation for this discrepancy is presented. In a verifying experiment, the algorithm identified the condition with no inclusion present.

Originality/value

The approach outlined in this work, adds to the prospect of developing time-sensitive diagnostic instruments. This approach has the potential to provide a powerful technique to quickly present spatial information on detected tumors.

Keywords

Acknowledgements

This research was undertaken with the funding provided by the EU Structural Fund – North Sweden. The authors wish to thank Richard Carus, Morgan Electro Ceramics Ltd., Wrexham, England, who kindly provided the piezoelectric disks used in this study, and Fredrik Holmgren, Department of Applied Physics and Electronics, Umeå University, Sweden, who prepared the PA6GPE inclusions.

Citation

Jonsson, U.G., Lindahl, O.A. and Andersson, B.M. (2020), "Using a look-up table technique and finite element calculations for quick detection of stiff inclusions in silicone rubber", Engineering Computations, Vol. 37 No. 6, pp. 2137-2153. https://doi.org/10.1108/EC-02-2019-0036

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles