TY - JOUR AB - Purpose The purpose of this paper is to present a comparison between reluctance synchronous machine-enabling work at high internal temperature (HT° machine) with laminated and solid rotor.Design/methodology/approach To obtain heat sources for the thermal model, calculations of the electromagnetic field were made using the Opera 3D program including effect of rotation and the resulting eddy current losses. To analyse the thermal phenomenon, the 3D coupled thermal-fluid (CFD) model is used.Findings The presented results show clearly that laminated construction is much better from a point of view of efficiency and temperature. However, solid construction can be interesting for high speed machines due to their mechanical robustness.Research limitations/implications The main problem, despite the use of parallel calculations, is the long calculation time.Practical implications The obtained simulation and experimental results show the possibility of building a machine operating at a much higher ambient temperature than it was previously produced for example in the vicinity of the aircraft turbines.Originality/value The paper presents the application of fully three-dimensional coupled electromagnetic and thermal analysis of new machine constructions designed for elevated temperature. VL - 38 IS - 4 SN - 0332-1649 DO - 10.1108/COMPEL-10-2018-0405 UR - https://doi.org/10.1108/COMPEL-10-2018-0405 AU - Lefik Marcin AU - Komeza Krzysztof AU - Napieralska-Juszczak Ewa AU - Roger Daniel AU - Napieralski Piotr Andrzej PY - 2019 Y1 - 2019/01/01 TI - Comparison of the reluctance laminated and solid rotor synchronous machine operating at high temperatures T2 - COMPEL - The international journal for computation and mathematics in electrical and electronic engineering PB - Emerald Publishing Limited SP - 1111 EP - 1119 Y2 - 2024/03/28 ER -