Double-wall pipe-type power-frequency electromagnetic heating device with diversion ring and its heating mode optimization

Abstract

Purpose

The purpose of this paper is to study the pipe-type electromagnetic induction heating device under power frequency condition.

Design/methodology/approach

To reduce eddy current loss and improve heating efficiency, the structure of a pipe-type power-frequency electromagnetic heating device was optimized. Based on the maximum load flow formula, a parallel excitation winding structure is designed, and the distribution of electromagnetic field under four different powers is analyzed by simulation. Four heating modes were proposed according to the structure of diversion ring, inner wall and outer wall. Two heating modes with better heating effect were obtained by comprehensively considering the factors such as magnetic field distribution, thermal power and energy consumption.

Findings

The double-wall structure of the pipe-type electromagnetic heating device can make the heat source distribution more uniform, and the use of power-frequency power supply can increase security, the installation of diversion ring can make the heating more sufficient and the heating efficiency of the two heating methods selected according to the structural performance is more than 90%.

Originality/value

In view of the medium or high frequency of pipe-type electromagnetic heating device, it is necessary to configure high power electronic frequency conversion drive system, and eddy current can only be produced on the tube wall, resulting in uneven distribution of heat sources. A pipe-type power-frequency electromagnetic heating device with double-wall structure was proposed.

Citation

Zhou, F., Wang, Z. and Zhao, Y. (2022), "Double-wall pipe-type power-frequency electromagnetic heating device with diversion ring and its heating mode optimization", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. ahead-of-print No. ahead-of-print. https://doi.org/10.1108/COMPEL-05-2022-0178