A positive, negative and zero sequences electric power, to improve upon the standard IEEE 1459-2010

Abstract

Purposes

The purpose of this paper is to identify on the instantaneous electrical power basis of a nonsinusoidal periodic current three-phase asymmetric system, active and reactive positive, negative and zero sequence powers, taking into account higher harmonics. The main power theories, including those embodied in the IEEE 1459 standard, do not allow to evaluate some of power components.

Design/methodology/approach

A well-known fact is that the three-phase AC system total power with the symmetry of currents and voltages is constant. It corresponds to the electrical energy transfer process in a DC system. In this case, the electrical energy transmission can be taken as high quality. It has been established that the components of active and reactive powers are because of the product of current and voltage of unidirectional sequences. The orthogonal components of the oscillating power are because of the product of the voltage and current components of different sequences, with the exception of the zero sequence.

Findings

For an unbalanced nonsinusoidal mode of a three-phase system, the components of instantaneous power were defined, corresponding to the active and reactive positive and negative and zero sequences powers with the selection of the fundamental and higher harmonics. The active and reactive powers of sequences were divided into two categories – consumed and generated.

Originality/value

It is proposed to use the ratio of “interfere” power RMS value to the total power RMS value to assess the instantaneous power distortion.

Citation

Bialobrzheskyi, O.V. and Rod'Kin, D. (2023), "A positive, negative and zero sequences electric power, to improve upon the standard IEEE 1459-2010", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 42 No. 2, pp. 402-424. https://doi.org/10.1108/COMPEL-03-2022-0109