TY  - JOUR
AB  - Purpose Rectangular conductors play an important role in planar transmission line structures, multiconductor transmission lines, in power transmission and distribution systems, LCL filters, transformers, industrial busbars, MEMs devices, among many others. The precise determination of the inductance of such conductors is necessary for their design and optimization, but no explicit solution for the AC resistance and internal inductances per-unit length of a linear conductor with a rectangular cross-section has been found, so numerical methods must be used. The purpose of this paper is to introduce the use of a novel numerical technique, the proper generalized decomposition (PGD), for the calculation of DC and AC internal inductances of rectangular conductors.Design/methodology/approach The PGD approach is used to obtain numerically the internal inductance of a conductor with circular cross-section and with rectangular cross-section, both under DC and AC conditions, using a separated representation of the magnetic vector potential in a 2D domain. The results are compared with the analytical and approximate expressions available in the technical literature, with an excellent concordance.Findings The PGD uses simple one-dimensional meshes, one per dimension, so the use of computational resources is very low, and the simulation speed is very high. Besides, the application of the PGD to conductors with rectangular cross-section is particularly advantageous, because rectangular shapes can be represented with a very few number of independent terms, which makes the code very simple and compact. Finally, a key advantage of the PGD is that some parameters of the numerical model can be considered as additional dimensions. In this paper, the frequency has been considered as an additional dimension, and the internal inductance of a rectangular conductor has been computed for the whole range of frequencies desired using a single numerical simulation.Research limitations/implications The proposed approach may be applied to the optimization of electrical conductors used in power systems, to solve EMC problems, to the evaluation of partial inductances of wires, etc. Nevertheless, it cannot be applied, as presented in this work, to 3D complex shapes, as, for example, an arrangement of layers of helically stranded wires.Originality/value The PGD is a promising new numerical procedure that has been applied successfully in different fields. In this paper, this novel technique is applied to find the DC and AC internal inductance of a conductor with rectangular cross-section, using very dense and large one-dimensional meshes. The proposed method requires very limited memory resources, is very fast, can be programmed using a very simple code, and gives the value of the AC inductance for a complete range of frequencies in a single simulation. The proposed approach can be extended to arbitrary conductor shapes and complex multiconductor lines to further exploit the advantages of the PGD.
VL  - 35
IS  - 6
SN  - 0332-1649
DO  - 10.1108/COMPEL-03-2016-0124
UR  - https://doi.org/10.1108/COMPEL-03-2016-0124
AU  - Pineda-Sanchez Manuel
AU  - Sapena-Baño Angel
AU  - Perez-Cruz Juan
AU  - Martinez-Roman Javier
AU  - Puche-Panadero Ruben
AU  - Riera-Guasp Martin
PY  - 2016
Y1  - 2016/01/01
TI  - Internal inductance of a conductor of rectangular cross-section using the proper generalized decomposition
T2  - COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
PB  - Emerald Group Publishing Limited
SP  - 2007
EP  - 2021
Y2  - 2024/04/24
ER  -