Optimization of the carbon nanotubes synthesis in arc discharge systems
ISSN: 0332-1649
Article publication date: 10 August 2018
Issue publication date: 30 October 2018
Abstract
Purpose
The purpose of this paper is to focus on the influence of electromagnetic field during the arc discharge carbon nanotubes synthesis. It proposes modeling of electromagnetic field distribution to calculate forces in the area of arcing. The paper presents the influence of this field on the final product of the synthesis.
Design/methodology/approach
A short literature review of the arc discharge systems supported by electromagnetic field is presented. The technical solution of the coil placement is discussed. An experimental research is described. The research system constructed preceded by a series of measurements and modeling is analyzed.
Findings
The paper describes the significant meaning of the electromagnetic field during the synthesis. The electromagnetic field forces the slow rotation of the carbon plasma column where carbon nanotubes are formed. It leads to the improvement in yield.
Research limitations/implications
Because the research is limited to one type of geometry of the reactor, the results may vary in different reactors. However, the influence of the electromagnetic field is confirmed. Therefore, researchers are encouraged to investigate the influence of the electromagnetic coil in the applied systems.
Practical implications
The systems with a coil inside the reactor require the application of complex cooling systems or/and additional screens. The work proposes a technical solution based on the coil placed outside the reactor. Therefore, it simplifies the construction and increases the yield.
Social implications
The high yield of the high-quality nanotubes opens new technical possibilities for electronics and electrical engineering.
Originality/value
The paper identifies a connection between the electromagnetic field, the arc discharge movement, plasma jet, carbon nanotubes containing deposit and the yield.
Keywords
Acknowledgements
The work has been financed from the budget of science as a research project N N510 390138 and PBS2/A5/31/2013.
Citation
Raniszewski, G. (2018), "Optimization of the carbon nanotubes synthesis in arc discharge systems", COMPEL - The international journal for computation and mathematics in electrical and electronic engineering, Vol. 37 No. 5, pp. 1618-1625. https://doi.org/10.1108/COMPEL-01-2018-0019
Publisher
:Emerald Publishing Limited
Copyright © 2018, Emerald Publishing Limited