To read the full version of this content please select one of the options below:

Aluminum formwork system: loss and productivity

Marina Macedo de Abreu (Universidade de Pernambuco, Recife, Brazil)
Alberto Casado Lordsleem Jr (Universidade de Pernambuco, Recife, Brazil)

Built Environment Project and Asset Management

ISSN: 2044-124X

Article publication date: 17 September 2019

Issue publication date: 20 September 2019

Abstract

Purpose

The purpose of this paper is to establish and evaluate the concrete loss and labor productivity (LP) indicators in the concreting step of aluminum formwork system (AFS) in construction in Brazil. The loss and productivity indicators are directed to a regional database (Pernambuco, Brazil).

Design/methodology/approach

Case study was selected as the most appropriate approach. The methodology included data collection in the construction project with 10 residential towers of 320 apartments, in the city of Jaboatão dos Guararapes, Brazil, throughout 82 concrete pouring days using 415 concrete mixer trucks, with a total of 2,582.50 m3 of concrete.

Findings

The findings identified an average concrete loss of 2.6 percent and the LP indicator varying between 0.15 and 0.97 WH/m3. It could be verified that the loss indicators were influenced mainly by the learning effect associated to the qualification of the labor. In addition, the productivity indicators were strongly influenced by delays at the beginning of the concrete pouring and by problems coming from the sequence of concrete supply.

Originality/value

LP indicators are still literature restricted, especially considering only the concreting step. The direct observations of this study allow the identification of factors that inhibit productivity. The comparison of indicators for the concreting service between the ASF and the conventional system attests to the speed, low cost and efficiency of the system studied in this paper.

Keywords

Citation

Abreu, M.M.d. and Lordsleem Jr, A.C. (2019), "Aluminum formwork system: loss and productivity", Built Environment Project and Asset Management, Vol. 9 No. 5, pp. 616-627. https://doi.org/10.1108/BEPAM-04-2018-0070

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited