To read this content please select one of the options below:

Fault tree analysis method for deterioration of timber bridges using an Australian case study

Weena Lokuge (Faculty of Health Engineering and Sciences, University of Southern Queensland, Toowoomba, Australia)
Nirdosha Gamage (RMIT University, Melbourne, Australia)
Sujeeva Setunge (RMIT University, Melbourne, Australia)

Built Environment Project and Asset Management

ISSN: 2044-124X

Article publication date: 4 July 2016

384

Abstract

Purpose

Deterioration of timber bridges can often be related to a number of deficiencies in the bridge elements, connectors and/or as a result of been in aggressive environments which they are exposed to. The maintenance cost of timber bridges is affected significantly by a number of deterioration mechanisms which require a systematic approach for diagnosis and treatment. Evaluating the risk of failure of these bridges is of importance in bridge performance assessment and decision making to optimize rehabilitation options. The paper aims to discuss these issues.

Design/methodology/approach

This paper identifies common causes for timber bridge deterioration and demonstrates an integrated approach based on fault tree analysis to obtain qualitative or quantitative estimation of the risk of failure of timber bridge sub-systems. Level 2 inspection report for a timber bridge in Queensland, Australia has been utilized as a case study in this research to identify the failure modes of the bridge.

Findings

A diagnostic tool for timber bridge deterioration will benefit asset inspectors, managers, and engineers to identify the type, size and the distress mechanisms in order to recognize the proper corrective measures either to prevent or to reduce further deterioration. Timber bridge maintenance is a major issue in Queensland, Australia. If a decision support tool can be developed, it will benefit road authorities and local councils.

Originality/value

Timber bridge maintenance is a major issue in Queensland, Australia. If a decision support tool can be developed as initiated in this research paper it will benefit road authorities and local councils.

Keywords

Acknowledgements

The authors appreciate the support of Tony Mcdonald from Lockyer Valley Regional Council for providing the inspection report for the case study bridge.

Citation

Lokuge, W., Gamage, N. and Setunge, S. (2016), "Fault tree analysis method for deterioration of timber bridges using an Australian case study", Built Environment Project and Asset Management, Vol. 6 No. 3, pp. 332-344. https://doi.org/10.1108/BEPAM-01-2016-0001

Publisher

:

Emerald Group Publishing Limited

Copyright © 2016, Emerald Group Publishing Limited

Related articles