To read this content please select one of the options below:

The green trajectory of an aircraft aided during take-off by ground-based system using magnetic levitation technology

Andrzej Robert Majka (Department of Aircrafts and Aircraft Engines, Rzeszow University of Technology, Rzeszow, Poland)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 3 May 2016

174

Abstract

Purpose

The purpose of the paper is to determine the optimal conditions of the take-off and the optimal trajectory of the initial climb minimizing the fuel consumption of the aircraft aided in the ground phase of the take-off by the system using the MAGLEV technology.

Design/methodology/approach

The study concerned determining the optimal trajectory of the initial phase of the transport aircraft climb aided in the phase of acceleration by the system using the magnetic levitation phenomenon. The simplified algorithm of the Ritz–Galerkin method was used in this work which uses an approximate solution to boundary value problems for determining the optimal flight trajectory. It uses the method of approximation of the flight path by the third-degree polynomial. The method allows determining the optimal trajectory of the flight satisfying the initial/final conditions and control functions and path constrains for an aircraft. General stating of the task supposes determining the optimal trajectory of movement of a flying vehicle described by the system of ordinary differential equations. The resulting sparse non-linear programming problem has been solved using own elaborated software. The typical profiles computation has been performed with a tool combining three degree of freedom flight dynamics differential equations with procedure-oriented flight control.

Findings

Different conditions of the take-off of the aircraft aided by the ground system using the MAGLEV technology give possibilities to shape the trajectory of the initial stage of the aircraft climb after the lift-off to decrease the negative influence on the environment. Optimization of the departure trajectory minimizing fuel consumption or noise emissions can become the basis for working out new procedures for a new kind of take-off modified in relation to the optimal solution which will increase the safety of this segment of the flight.

Research limitations/implications

The analysis was carried out only for the departure trajectory to minimize fuel consumption, without investigation of possibilities of noise reduction. The trajectory guaranteeing minimization of the fuel consumption would also give a solution characterized by minimal emission of substances harmful for the environment.

Practical implications

Application of the innovatory solution of aided take-off is connected with modification of the climbing procedures after the take-off to minimize the negative effect of the aircraft on the surrounded environment. The results can become the basis for working out new procedures which will minimize negative influence to the natural environment in the vicinity of the airports of air transport and increase safety of the take-off and landing operations.

Originality/value

Innovative method of the take-off implies new shape of the trajectory. The study presents the results of the climb trajectory optimization of the aircraft supported at the ground stage by the technology using magnetic levitation phenomenon.

Keywords

Acknowledgements

This material is based upon the work supported by the European Commission, under Contract No 284884, “Integrated Ground and on-Board system for Support of the Aircraft Safe Take-off and Landing” – GABRIEL.

Citation

Majka, A.R. (2016), "The green trajectory of an aircraft aided during take-off by ground-based system using magnetic levitation technology", Aircraft Engineering and Aerospace Technology, Vol. 88 No. 3, pp. 432-440. https://doi.org/10.1108/AEAT-11-2013-0207

Publisher

:

Emerald Group Publishing Limited

Copyright © 2016, Emerald Group Publishing Limited

Related articles