To read this content please select one of the options below:

Microwave absorption performance of hexagonal nano boron nitride doped basalt fabric-reinforced epoxy composites

Fatma Bakal (Department of Metallurgical and Materials Engineering, Iskenderun Technical University, Iskenderun, Turkey)
Ahmet Yapici (Department of Mechanical Engineering, Iskenderun Technical University, Iskenderun, Turkey)
Muharrem Karaaslan (Department of Electrical and Electronics Engineering, Iskenderun Technical University, Iskenderun, Turkey)
Oğuzhan Akgöl (Department of Electrical and Electronics Engineering, Iskenderun Technical University, Iskenderun, Turkey)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 7 January 2021

Issue publication date: 16 February 2021

335

Abstract

Purpose

The purpose of this paper is to investigate the effect of doping element on the microwave absorption performance of hexagonal nano boron nitride (h-nBN)-reinforced basalt fabric (BF)/epoxy composites. A new type of hybrid composite that will be produced by the use of boron nitride as an additive that leads to increased radar absorption capability will be developed and a new material that can be used in aeronautical radar applications.

Design/methodology/approach

This study is focused on the microwave absorption properties of h-nBN doped basalt fabric-reinforced epoxy composites. Basalt fabric (BF)/epoxy composites (pure composites) and the BF/h-nBN (1 Wt.% h-nBN doped composites) hybrid composites were fabricated by vacuum infusion method. Phase identification of the composites were performed using X-ray diffraction (XRD), the 2θ scan range was from 10 to 60 with the scanning speed of 3°/min and surface morphologies of the composites were investigated using scanning electron microscopy (SEM). Microwave properties of samples were investigated through transmission/reflection measurements in Agilent brand 2-Port PNA-L Network Analyzer in the frequency range of 3–18 GHz. The prepared sample is positioned between two horn antennas with and without metal plate.

Findings

Experimental results show that h-nBN doped composite was synthesized successfully and the produced hexagonal nano boron nitride-added fiber laminated composite material has good absorption behavior when they are used with metallic sheets and good for isolation applications at many points in the 3–18 GHz band.

Originality/value

This paper will contribute to the literature on the use of basalt fabric, which are new types of fibers, and hexagonal nano boron nitride and the effects of boron nitride on radar absorption properties of composite material. It presents detail characterization of each composite by using XRD and scanning electron microscopy.

Keywords

Acknowledgements

This work is supported by the TÜBİTAK (The Scientific and Technological Research Council of Turkey) 1002 – The Support program for Short Term R&D project. The number of the project is 219M018.

Citation

Bakal, F., Yapici, A., Karaaslan, M. and Akgöl, O. (2021), "Microwave absorption performance of hexagonal nano boron nitride doped basalt fabric-reinforced epoxy composites", Aircraft Engineering and Aerospace Technology, Vol. 93 No. 1, pp. 205-211. https://doi.org/10.1108/AEAT-06-2020-0126

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles