To read this content please select one of the options below:

The pre-process DV-UKF algorithm for high-precision attitude measurement with low-cost inertial sensor

Rong Wang (Department of Automation and Measurement, Ocean University of China, Qingdao, China)
Jin Wu (Department of Electronic and Computer Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Hong Kong)
Chong Li (School of Electronic and Information Engineering, Harbin Institute of Technology Shenzhen, Shenzhen, China)
Shengbo Qi (Department of Automation and Measurement, Ocean University of China, Qingdao, China)
Xiangrui Meng (Department of Automation and Measurement, Ocean University of China, Qingdao, China)
Xinning Wang (Department of Automation and Measurement, Ocean University of China, Qingdao, China)
Chengxi Zhang (School of Electronic and Information Engineering, Harbin Institute of Technology Shenzhen, Shenzhen, China)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 16 March 2022

Issue publication date: 30 May 2022

92

Abstract

Purpose

The purpose of this paper is to propose a high-precision attitude solution to solve the attitude drift problem caused by the dispersion of low-cost micro-electro-mechanical system devices in strap-down inertial navigation attitude solution of micro-quadrotor.

Design/methodology/approach

In this study, a three-stage attitude estimation scheme that combines data preprocessing, gyro drifts prediction and enhanced unscented Kalman filtering (UKF) is proposed. By introducing a preprocessing model, the quaternion orientation is calculated as the composition of two algebraic quaternions, and the decoupling feature of the two quaternions makes the roll and pitch components independent of magnetic interference. A novel real-time based on differential value (DV) estimation algorithm is proposed for gyro drift. This novel solution prevents the impact of quartic characteristics and uses the iterative method to meet the requirement of real-time applications. A novel attitude determination algorithm, the pre-process DV-UKF algorithm, is proposed in combination with UKF based on the above solution and its characteristics.

Findings

Compared to UKF, both simulation and experimental results demonstrate that the pre-process DV-UKF algorithm has higher reliability in attitude determination. The dynamic errors in the three directions of the attitude are below 2.0°, the static errors are all less than 0.2° and the absolute attitude errors tailored by average are about 47.98% compared to the UKF.

Originality/value

This paper fulfils an identified need to achieve high-precision attitude estimation when using low-cost inertial devices in micro-quadrotor. The accuracy of the pre-process DV-UKF algorithm is superior to other products in the market.

Keywords

Acknowledgements

This work was supported by National Natural Science Foundation of China under Grant 62171420 and Natural Science Foundation of Shandong under Grant ZR201910230031.

Funding: Central University Basic Research Fund of China (201962012).

Citation

Wang, R., Wu, J., Li, C., Qi, S., Meng, X., Wang, X. and Zhang, C. (2022), "The pre-process DV-UKF algorithm for high-precision attitude measurement with low-cost inertial sensor", Aircraft Engineering and Aerospace Technology, Vol. 94 No. 7, pp. 1188-1199. https://doi.org/10.1108/AEAT-05-2021-0169

Publisher

:

Emerald Publishing Limited

Copyright © 2022, Emerald Publishing Limited

Related articles