To read this content please select one of the options below:

Impact of OEI requirement on parallel hybrid electric turboprop regional aircraft optimization

Dominik Quillet (Createk Innovation Group, Institut Interdisciplinaire d’Innovation Technologique (3IT), Université de Sherbrooke, Sherbrooke, Canada)
Vincent Boulanger (Createk Innovation Group, Institut Interdisciplinaire d’Innovation Technologique (3IT), Université de Sherbrooke, Sherbrooke, Canada)
David Rancourt (Createk Innovation Group, Institut Interdisciplinaire d’Innovation Technologique (3IT), Université de Sherbrooke, Sherbrooke, Canada)
Richard Freer (Pratt and Whitney Canada, Longeuil, Canada)
Pierre Bertrand (Pratt and Whitney Canada, Longeuil, Canada)

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 3 August 2022

Issue publication date: 6 January 2023

134

Abstract

Purpose

Parallel hybrid electric (HE) propulsion retrofit is a promising alternative to reduce fuel burn of aircraft operating on short regional flights. However, if the batteries are depleted at the end of the mission, the hybrid powertrain designs with downsized gas turbines (GTs) and additional electric motors might not meet the one-engine inoperative (OEI) missed approach climb performance required by the certification. Alternatively, hybrid designs using the original full-size GT can perform one engine climb without electric assistance. This paper aims to evaluate the impact of overshoot climb requirements on powertrain design and performance comparing the two design approaches.

Design/methodology/approach

An aircraft-level parametric mission analysis model is used to evaluate aircraft performance combined with an optimization framework including multiple constraints. An indirect approach using metamodels is used to optimize powertrain sizing and operation strategy.

Findings

Considering OEI climb requirements, no benefits were found using a design with downsized GTs. Equivalent fuel burns were found for hybrid designs that keep the original size GTs, but do not require electric energy for the OEI overshoot at the end of the mission. Then, it is recommended to size the GT to maintain the emergency climb capabilities with no electric assistance to ensure power availability regardless of remaining battery energy.

Originality/value

This work introduces a new perspective on parallel HE sizing with consideration for the dependency of power capability at aircraft level on the electric energy availability in case of critical mission scenarios such as overshoot climb at the end of the mission.

Keywords

Acknowledgements

The authors would like to acknowledge Pratt & Whitney Canada, the Consortium de Recherche et d'Innovation en Aérospatiale au Québec (CRIAQ) and the Natural Science and Engineering Council of Canada (NSERC) for financial support in the HEPOS project. The research was conducted in collaboration between Université de Sherbrooke (QC, Canada), Université Laval (QC, Canada) and the industrial partner Pratt & Whitney Canada.

Citation

Quillet, D., Boulanger, V., Rancourt, D., Freer, R. and Bertrand, P. (2023), "Impact of OEI requirement on parallel hybrid electric turboprop regional aircraft optimization", Aircraft Engineering and Aerospace Technology, Vol. 95 No. 2, pp. 276-283. https://doi.org/10.1108/AEAT-02-2022-0051

Publisher

:

Emerald Publishing Limited

Copyright © 2022, Emerald Publishing Limited

Related articles