TY - JOUR AB - Purpose The purpose of the study is to measure the mass flow in the flow through the labyrinth seal of the gas turbine and compare it to the results of numerical simulation. Moreover the capability of two turbulence models to reflect the phenomenon will be assessed. The studied case will later be used as a reference case for the new, original design of flow control method to limit the leakage flow through the labyrinth seal.Design/methodology/approach Experimental measurements were conducted, measuring the mass flow and the pressure in the model of the labyrinth seal. It was compared to the results of numerical simulation performed in ANSYS/Fluent commercial code for the same geometry.Findings The precise machining of parts was identified as crucial for obtaining correct results in the experiment. The model characteristics were documented, allowing for its future use as the reference case for testing the new labyrinth seal geometry. Experimentally validated numerical model of the flow in the labyrinth seal was developed.Research limitations/implications The research studies the basic case, future research on the case with a new labyrinth seal geometry is planned. Research is conducted on simplified case without rotation and the impact of the turbine main channel.Practical implications Importance of machining accuracy up to 0.01 mm was found to be important for measuring leakage in small gaps and decision making on the optimal configuration selection.Originality/value The research is an important step in the development of original modification of the labyrinth seal, resulting in leakage reduction, by serving as a reference case. VL - 91 IS - 8 SN - 1748-8842 DO - 10.1108/AEAT-01-2018-0038 UR - https://doi.org/10.1108/AEAT-01-2018-0038 AU - Wasilczuk Filip AU - Flaszynski Pawel AU - Kaczynski Piotr AU - Szwaba Ryszard AU - Doerffer Piotr AU - Marugi Krzysztof PY - 2018 Y1 - 2018/01/01 TI - Leakage flow analysis in the gas turbine shroud gap T2 - Aircraft Engineering and Aerospace Technology PB - Emerald Publishing Limited SP - 1077 EP - 1085 Y2 - 2024/03/28 ER -