Microstructures and immersion corrosion performances of arc sprayed amorphous Al-Ti-Ni coating on S355 structural steel
Anti-Corrosion Methods and Materials
ISSN: 0003-5599
Article publication date: 6 June 2018
Issue publication date: 22 June 2018
Abstract
Purpose
In this study, an amorphous Al-Ti-Ni coating was fabricated on S355 steel using an arc spraying, and its corrosion behavior immersed in 3.5 per cent NaCl solution for 720 h was discussed, which provided an experimental basis for the application of arc sprayed Al-Ti-Ni coating on S355 steel on marine platform.
Design/methodology/approach
An amorphous Al-Ti-Ni coating was sprayed on S355 structural steel using an arc spraying. The surface-interface morphologies, chemical element compositions and phases of the obtained Al-Ti-Ni coating were analyzed using a scanning electron microscope, energy dispersive spectrometer and X-ray diffractometer, respectively. The distributions of chemical elements on the coating surface and interface were analyzed using an energy spectrum scanning; the bonding mechanism between the coating and the substrate was also discussed.
Findings
Financial support for this research by the Key Research and Development Project of Jiangsu Province (BE2016052).
Originality/value
In this study, an amorphous Al-Ti-Ni coating was fabricated on S355 steel using an arc spraying, its corrosion behavior immersed in 3.5 per cent 25 NaCl solution for 720 h was discussed.
Keywords
Acknowledgements
Financial support for this research by the Key Research and Development Project of Jiangsu Province (BE2016052) is gratefully acknowledged.
Citation
Haixiang, C. and Dejun, K. (2018), "Microstructures and immersion corrosion performances of arc sprayed amorphous Al-Ti-Ni coating on S355 structural steel", Anti-Corrosion Methods and Materials, Vol. 65 No. 3, pp. 271-280. https://doi.org/10.1108/ACMM-09-2017-1847
Publisher
:Emerald Publishing Limited
Copyright © 2018, Emerald Publishing Limited