To read this content please select one of the options below:

Nonlinear time-optimal trajectory planning for varying-rope-length overhead cranes

Yiming Wu (Institute of Robotics, Nankai University, Tianjin, China)
Ning Sun (Institute of Robotics, Nankai University, Tianjin, China)
He Chen (Institute of Robotics, Nankai University, Tianjin, China)
Jianyi Zhang (Institute of Robotics, Nankai University, Tianjin, China)
Yongchun Fang (Institute of Robotics, Nankai University, Tianjin, China)

Assembly Automation

ISSN: 0144-5154

Article publication date: 8 October 2018

Issue publication date: 6 December 2018

273

Abstract

Purpose

From practical perspectives and to improve the working efficiency, trolley transportation and payload hoisting/lowering should be simultaneously controlled. Moreover, in practical crane applications, the transportation time is an important criterion for improving transportation efficiency. Based on these requirements, this paper aims to solve positioning and antiswing control problems and shorten the transportation time for underactuated varying-rope-length overhead cranes.

Design/methodology/approach

By choosing trolley acceleration and varying-rope-length acceleration as system inputs, the crane system dynamic model is converted into an equivalent model without linearizing/approximating. Then, based on the converted model and system state constraints, a time-optimal problem is formulated. Further, the original problem is converted into an optimization problem with algebraic constraints which can be conveniently solved. Finally, by solving the optimization problem, the optimal trajectories of system states, including displacements, velocities and accelerations, are obtained.

Findings

This paper first provides a nonlinear time-optimal trajectory planner for varying-rope-length overhead cranes, which achieves accurate and fast trolley positioning and eliminates payload residual swings. Meanwhile, all system states satisfy the given constraints during the entire process. Hardware experimental results show that the proposed time-optimal planner is effective and has better performance compared with existing methods.

Originality/value

This paper proposes a time-optimal trajectory planner for overhead crane systems with hoisting/lowering motion. The proposed planner achieves fast trolley positioning and eliminates payload residual swing with all the system states being constrained within given scopes. The planner is presented based on the original nonlinear system dynamics without linearization/approximation.

Keywords

Citation

Wu, Y., Sun, N., Chen, H., Zhang, J. and Fang, Y. (2018), "Nonlinear time-optimal trajectory planning for varying-rope-length overhead cranes", Assembly Automation, Vol. 38 No. 5, pp. 587-594. https://doi.org/10.1108/AA-12-2017-183

Publisher

:

Emerald Publishing Limited

Copyright © 2018, Emerald Publishing Limited

Related articles