The purpose of this paper is to present an optimal posture evaluation model to control the assembly gaps in aircraft wing assembly. The gaps between two mating surfaces should be strictly controlled in precision manufacturing. Oversizing of gaps will decrease the dimensional accuracy and may reduce the fatigue life of a mechanical product. To reduce the gaps and keep them within tolerance, the relative posture (orientation and position) of two components should be optimized in the assembly process.
Based on the step alignment strategy, i.e. preliminary alignment and refined alignment, the concept of a small posture transformation (SPT) is introduced. In the preliminary alignment, an initial posture is estimated by a set of auxiliary locating points, with which the components can be quickly aligned near each other. In the refined alignment, the assembly gaps are calculated and the formulation of the gaps with component posture is derived by the SPT. A comprehensive weighted minimization model with gap tolerance constraints is established for redistributing the gaps in multi-regions. Powell-Hestenes-Rockafellar optimization, Singular Value Decomposition and K-Dimensional tree searching are introduced for the solution of the optimal posture for localization.
Using the SPT, the trigonometric posture transformation is linearized, which benefits the iterative solution process. Through the constrained model, overall gaps are minimized and excess gaps are controlled within tolerance.
This method has been tested with simulated model data and real product data, the results of which have shown efficient coordination of mating components.
This paper proposed an optimal posture evaluation method for minimizing the gaps between mating surfaces through component adjustments. This will promote the assembly automation and variation control in aircraft wing assembly.
The authors gratefully acknowledge the support of the National Natural Science Foundation of China (No. 51375442). They would also like to thank the editors and the anonymous referees for their insightful comments.
Wang, Q., Dou, Y., Li, J., Ke, Y., Keogh, P. and Maropoulos, P. (2017), "An assembly gap control method based on posture alignment of wing panels in aircraft assembly", Assembly Automation, Vol. 37 No. 4, pp. 422-433. https://doi.org/10.1108/AA-04-2016-031Download as .RIS
Emerald Publishing Limited
Copyright © 2017, Emerald Publishing Limited