TY  - JOUR
AB  - Purpose– Laser shock peening (LSP) is mainly a mechanical process, but in some cases, it is performed without a protective coating and thermal effects are present near the surface. The numerical study of thermo‐mechanical effects and process parameter influence in realistic conditions can be used to better understand the process.Design/methodology/approach– A physically comprehensive numerical model (SHOCKLAS) has been developed to systematically study LSP processes with or without coatings starting from laser‐plasma interaction and coupled thermo‐mechanical target behavior. Several typical results of the developed SHOCKLAS numerical system are presented. In particular, the application of the model to the realistic simulation (full 3D dependence, non‐linear material behavior, thermal and mechanical effects, treatment over extended surfaces) of LSP treatments in the experimental conditions of the irradiation facility used by the authors is presented.Findings– Target clamping has some influence on the results and needs to be properly simulated. An increase in laser spot radius and an increase in pressure produces an increase of the maximum compressive residual stress and also the depth of the compressive residual stress region. By increasing the pulse overlapping density, no major improvements are obtained if the pressure is high enough. The relative influence of thermal/mechanical effects shows that each effect has a different temporal scale and thermal effects are limited to a small region near the surface and compressive residual stresses very close to the surface level can be induced even without any protective coating through the application of adjacent pulses.Originality/value– The paper presents numerical thermo‐mechanical study for LSP treatments without coating and a study of the influence of several process parameters on residual stress distribution with consideration of pulse overlapping.
VL  - 2
IS  - 1
SN  - 1757-9864
DO  - 10.1108/17579861111108617
UR  - https://doi.org/10.1108/17579861111108617
AU  - Morales Miguel
AU  - Correa Carlos
AU  - Porro Juan Antonio
AU  - Molpeceres Carlos
AU  - Luis Ocaña José
ED  - Goran Ivetic
PY  - 2011
Y1  - 2011/01/01
TI  - Thermomechanical modelling of stress fields in metallic targets subject to laser shock processing
T2  - International Journal of Structural Integrity
PB  - Emerald Group Publishing Limited
SP  - 51
EP  - 61
Y2  - 2024/09/22
ER  -