Qualifound – a modular tool developed for quality improvement in foundries

Abstract

Purpose

Castings defects are usually easy to characterize, but to eradicate them can be a difficult task. In many cases, defects are caused by the combined effect of different factors, whose identification is often difficult. Besides, the real non‐quality costs are usually unknown, and even neglected. This paper aims to describe the development of a modular tool for quality improvement in foundries, and its main objective is to present the application potential and the foundry process areas that are covered and taken into account.

Design/methodology/approach

The integrated model was conceived as an expert system, designated Qualifound, which performs both qualitative and quantitative analyses. For the qualitative analyses mode, the nomenclature and the description of defects are based on the classification suggested by the International Committee of the Foundry Technical Association. Thus, a database of defects was established, enabling one to associate the defects with the relevant process operations and the identification of their possible causes. The quantitative analysis mode deals with the number of produced and rejected castings and includes the calculation of the non‐quality costs.

Findings

The validation of Qualifound was carried out in a Portuguese foundry, whose quality system had been certified according to the ISO 9000 standards. Qualifound was used in every management area and it was concluded that the application had the required technological requisites to provide the necessary information for the foundry management to improve process quality.

Originality/value

The paper presents a successful application of an informatics tool on quality improvement in foundries.

Citation

Santos, G. and Barbosa, J. (2006), "Qualifound – a modular tool developed for quality improvement in foundries", Journal of Manufacturing Technology Management, Vol. 17 No. 3, pp. 351-362. https://doi.org/10.1108/17410380610648308