TY  - JOUR
AB  - Purpose– The purpose of this paper is to present a most accurate analytical model suit for the prediction of the elastic displacements in a ceramic strip for sensing longitudinal deformations. Accordingly, the objective of the analysis given is to develop a physically meaningful and simple‐as‐possible stress‐strain model for an elongated strip attached to a thick‐and‐stiff substrate.Design/methodology/approach– Today's advanced strain gage designs intended for measuring deformations and related physical characteristics use sensitive elements manufactured as ceramic strips. The output signal depends to a great extent on the ability to measure and to adequately interpret the induced elastic displacements in the strip, as the global electric resistor is coupled strongly to the strain field in the sensitive layer. The dependence of the strain on the thickness of a strip is calculated using an analytical 2D stress‐strain model using a shear tension applied at its interface with the substrate and zero‐stress at the opposite face as boundary conditions. All necessary considerations and calculations to develop the model are discussed.Findings– A significant result is the gradual reduction in the deformation depending on the layer thickness. Applying the model combines easy numerical effort with an expressive approximation.Originality/value– The developed model can be used in the analysis and physical design of the structural elements of the type in question, not necessarily in the field of strain gage and sensor engineering.
VL  - 28
IS  - 3
SN  - 1356-5362
DO  - 10.1108/13565361111162585
UR  - https://doi.org/10.1108/13565361111162585
AU  - Gschohsmann Walter
AU  - Nicolics Johann
AU  - Suhir Ephraim
PY  - 2011
Y1  - 2011/01/01
TI  - Deformations in stretched surface mounted ceramic strips for sensor applications
T2  - Microelectronics International
PB  - Emerald Group Publishing Limited
SP  - 19
EP  - 23
Y2  - 2024/05/12
ER  -