A frequency tunable half‐wave resonator using a MEMS variable capacitor

Abstract

A frequency tunable half‐wave resonator at 3 GHz is presented with a microelectromechanical systems (MEMS) variable capacitor as the tuning element. The capacitor is fabricated using the multi‐user MEMS process (MUMPs) technology provided by JDS/Cronos, and transferred to an alumina substrate by an in‐house developed flip‐chip process. This capacitor is electrostatically actuated. The resulting C‐V response is linear with a slope of 0.05 pF/V for a wide range of actuation voltages. The MEMS device has a capacitance ratio of 3:1 for 0‐70 V bias, with a Q‐factor of 140 measured at 1 GHz. A half‐wave tunable microstrip resonator with bias lines is designed to include this MEMS device, which exhibits linear tuning over 180 MHz (6 percent) centered around 3 GHz with a constant 3 dB bandwidth of 160 MHz over the entire tuning range. The power consumption of the MEMS device was measured to be negligible.

Citation

Bell, P., Hoivik, N., Bright, V. and Popovic, Z. (2003), "A frequency tunable half‐wave resonator using a MEMS variable capacitor", Microelectronics International, Vol. 20 No. 1, pp. 21-25. https://doi.org/10.1108/13565360310455481