Geometrical modeling of H&N cancer tumor

Abstract

Purpose

Most of the current radiation treatment planning systems use pre‐treatment computed tomography (CT) images to detect the tumor location and then plan the radiation therapy to be delivered during the treatment period. It is assumed that the tumor geometry will not change throughout the treatment course; however, tumor geometry is shown to be changing over time. The purpose of this paper is to present results of an ongoing research in 3‐D modeling and reconstruction of head and neck cancer tumors. The results from this phase of the project will be used in developing a prediction model for tumor deformation during radiation treatment of cancer patients.

Design/methodology/approach

By using CT scan data in the 3‐D ASCII format, the tumor's progressive geometric changes during the treatment period are quantified. After constructing slice contours, both triangular and rectangular patch approaches are applied to map and analyze the tumor surface and volume. The changes in tumor location are calculated based on a reference feature on the top of the spine canal. MATLAB routines are developed to perform the required calculations. A set of prototype mockups of different stages are used for the purpose of validation and verification of the proposed methodology.

Findings

The proposed method is applied to calculate volume, surface, and displacement of the tumor, using patients’ data obtained from the University of Texas‐MD Anderson Cancer Center. The results are consistent with the actual data.

Originality/value

The proposed methodology increases the accuracy of treatment planning by predicting the changes in tumor geometry. The literature survey reveals that no work has been devoted to mathematically model the geometrical changes that a tumor might go through after each radiation.

Citation

Kamrani, A.K. and Azimi, M. (2011), "Geometrical modeling of H&N cancer tumor", Rapid Prototyping Journal, Vol. 17 No. 1, pp. 55-63. https://doi.org/10.1108/13552541111098635