Numerical simulation of a two‐phase dilute flow in a diffuser pipe

Abstract

A numerical simulation of a two‐phase dilute flow (droplet‐gas mixture) is carried out by using a finite volume method based on Riemann solvers. The computational domain represents a one‐ended pipe with holes at its upper wall which lead into an enclosure. The aim of this study is to determine the parameters of such a flow. More specially, an analytical solution is compared with numerical results to assess the mass flow rates through the vents in the pipe. Inertia effects dominate the dynamic behaviour of droplets, which causes a non‐homogeneous flow in the cavity. The unsteady effects are also important, which makes isentropical calculation irrelevant and shows the necessity of the use of CFD tools to predict such flows. No relation can be extracted from the numerical results between the gas and the dispersed mass flow rates across the holes. But a linear variation law for the droplet mass flow versus the position of the holes is pointed out, which is independent of the incoming flow when the evaporating effects are quite low.

Citation

Daniel, E. and Loraud, J. (1998), "Numerical simulation of a two‐phase dilute flow in a diffuser pipe", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 8 No. 2, pp. 224-244. https://doi.org/10.1108/09615539810201893