TY  - JOUR
AB  - The periodically fully developed laminar heat transfer and fluid flow of an array of non‐uniform plate length, aligned at angles to air flow direction, have been investigated by numerical analysis in the Reynolds number range from 15 to 410. To implement the periodic boundary condition in both streamwise and spanwise directions and to confine the computation exactly within one cycle, proposes a linear interpolation technique, which has been proved successful by comparing the results with those obtained in an extended domain. It has been found that with an increase in the ratio of the long plate length to that of the short plate and with a decrease in the ratio of the transverse pitch to the streamwise cycle length, both the Nusselt number and friction factor decrease. Comparison of the numerical results of Nusselt number and friction factor with relevant experimental results have been performed. The agreement should be judged reasonably good.
VL  - 7
IS  - 5
SN  - 0961-5539
DO  - 10.1108/09615539710187792
UR  - https://doi.org/10.1108/09615539710187792
AU  - Wang L.B.
AU  - Tao W.Q.
PY  - 1997
Y1  - 1997/01/01
TI  - Numerical analysis on heat transfer and fluid flow for arrays of non‐uniform plate length aligned at angles to the flow direction
T2  - International Journal of Numerical Methods for Heat & Fluid Flow
PB  - MCB UP Ltd
SP  - 479
EP  - 496
Y2  - 2024/09/20
ER  -