Numerical modelling of elastohydrodynamic lubrication in soft contacts using non‐Newtonian fluids

Abstract

The paper focuses on the solution of a numerical model to explore the sliding and non‐Newtonian fluid behaviour in soft elastohydrodynamic nip contacts. The solution required the coupling of the fluid and elastomer regimes, with the non‐Newtonian fluid properties being described using a power law relationship. The analysis showed that the fluid characteristics as defined by the power law relationship led to large differences in the film thickness and flow rate with a movement of the peak pressure within the nip contact. The viscosity coefficient, power law index and sliding ratio were shown to affect the nip performance in a non‐linear manner in terms of flow rate and film thickness. This was found to be controlled principally by the level of viscosity defined by the power law equation. The use of a speed differential to control nip pumping capacity was also explored and this was found to be most sensitive at lower entrainment speeds.

Citation

Bohan, M.F.J., Fox, I.J., Claypole, T.C. and Gethin, D.T. (2002), "Numerical modelling of elastohydrodynamic lubrication in soft contacts using non‐Newtonian fluids", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 12 No. 4, pp. 494-511. https://doi.org/10.1108/09615530210433297