Contributions of in‐plane fabric tensile properties in woven fabric bagging behaviour using a new developed test method
International Journal of Clothing Science and Technology
ISSN: 0955-6222
Article publication date: 1 October 2004
Abstract
To investigate the relation of in‐plane fabric tensile properties with woven fabrics bagging behavior, a new test method was developed and a real time data acquisition and strain gauge technique were used. The bagging procedure was carried out while the woven fabric tensile deformations along warp and weft directions were measured. The fabric bagging behavior was characterized by bagging resistance, bagging fatigue, residual bagging height and residual bagging hysteresis. The experimental results show that the bagging load, work, hysteresis, residual hysteresis and fatigue are highly linearly correlated with corresponding parameters in warp and weft directions. An empirical relationship obtained between residual bagging height and bagging fatigue and resistance (R2=0.83) suggests that the proposed new test method is able to evaluate bagging behavior of fabrics.
Keywords
Citation
Abghari, R., Shaikhzadeh Najar, S., Haghpanahi, M. and Latifi, M. (2004), "Contributions of in‐plane fabric tensile properties in woven fabric bagging behaviour using a new developed test method", International Journal of Clothing Science and Technology, Vol. 16 No. 5, pp. 418-433. https://doi.org/10.1108/09556220410554615
Publisher
:Emerald Group Publishing Limited
Copyright © 2004, Emerald Group Publishing Limited