To read this content please select one of the options below:

A study on clothing pressure for men's suit comfort evaluation

Chen Dongsheng (Changchun University of Technology, Changchun, People's Republic of China)
Zhao Qing (Tottori University, Tottori, Japan)

International Journal of Clothing Science and Technology

ISSN: 0955-6222

Article publication date: 1 October 2003

1222

Abstract

In order to pursue men's suit wear comfort, the basic data on an accurate men's suit comfort analysis with clothing pressure is required. Therefore, in such investigation, it is difficult to find out ideal persons as test subjects. In the measuring experiments, we used dummies designed for resuscitation practice to obtain the clothing pressure with both normal standing posture and movement patterns and compared these data with subjects' to give the relationship of clothing pressure between the dummy and subject. The correlation between the measurements with dummies and the subjects' are shown. It turns out that the dummy D1 and D6 are mainly as intended in pressure measurement with normal standing posture. But the dummy D2 and D3 are not. It turns out that the dummy D1 can imitate the human shoulder's movement patterns well, and the dummy D4 and D6 are mainly as intended. But the dummy D2 is not. It turns out that all the dummies have a certain limitation to be placed in clothing pressure measurements. It also shows that instead of subject to use dummy to investigate clothing pressure with both normal standing posture and movement pattern, not only dummy's features such as compression hardness, form and size, but measuring postures are also needed to take into consideration.

Keywords

Citation

Dongsheng, C. and Qing, Z. (2003), "A study on clothing pressure for men's suit comfort evaluation", International Journal of Clothing Science and Technology, Vol. 15 No. 5, pp. 320-334. https://doi.org/10.1108/09556220310492598

Publisher

:

MCB UP Ltd

Copyright © 2003, MCB UP Limited

Related articles