TY  - JOUR
AB  - Composite solders were prepared by mechanically dispersing 15v% of Cu or Ag particles into the eutectic Sn‐3.5Ag solder. The average sizes for the nominally spherical Cu and Ag particles were 6 and 4 microns, respectively. Two different processing methods were used to prepare the composite solders: blending the powdered particles with solder paste, and adding particles to the molten solder at 2808C. The composite solders were characterised by studying the morphology, size and distribution of the reinforcing phase. Particular interest and emphasis are given towards the modifications of the reinforcements during the reflow process. Microstructural features and chemical analysis of the composite solders were studied using optical and scanning electron microscopy (SEM), and energy dispersive x‐ray (EDX) analysis. The effect of reflow and isothermal ageing on the microstructure as well as the morphological changes in the interfacial IM layer of the composite solders were extensively analysed. A mechanism for IM layer growth is proposed for solid state isothermal ageing.
VL  - 13
IS  - 1
SN  - 0954-0911
DO  - 10.1108/09540910110361668
UR  - https://doi.org/10.1108/09540910110361668
AU  - Guo F.
AU  - Choi S.
AU  - Lucas J.P.
AU  - Subramanian K.N.
PY  - 2001
Y1  - 2001/01/01
TI  - Microstructural characterisation of reflowed and isothermally‐aged Cu and Ag particulate reinforced Sn‐3.5Ag composite solders
T2  - Soldering & Surface Mount Technology
PB  - MCB UP Ltd
SP  - 7
EP  - 18
Y2  - 2024/09/20
ER  -