High performance UV‐cured coatings containing fluorinated monomers
R. Bongiovanni
(Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, Torino, Italy)
G. Malucelli
(Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, Torino, Italy)
A. Priola
(Dipartimento di Scienza dei Materiali e Ingegneria Chimica, Politecnico di Torino, Torino, Italy.)
242
Abstract
UV‐curable systems based on the copolymerisation of a typical acrylic resin with low amount of fluorinated monomers (less than 1 per cent w/w) were prepared. The bulk properties of the films were unchanged, while a strong modification of the surface was obtained, depending on the monomer structure, on its concentration and on the type of substrate.
Keywords
Citation
Bongiovanni, R., Malucelli, G. and Priola, A. (1999), "High performance UV‐cured coatings containing fluorinated monomers", Pigment & Resin Technology, Vol. 28 No. 1, pp. 26-30. https://doi.org/10.1108/03699429910252333
Publisher
:MCB UP Ltd
Copyright © 1999, MCB UP Limited