To read this content please select one of the options below:

A novel method for colouration of cotton using clay nano‐adsorbent treatment

Mazeyar Parvinzadeh Gashti (Textile Department, Islamic Azad University, Shahre Rey Branch, Tehran, Iran)
Rambod Rashidian (Department of Food Science and Technology, Islamic Azad University, Science and Research Branch, Mazandaran, Iran)
Arash Almasian (Department of Environmental Research, Institute for Color Science and Technology, Tehran, Iran)
Ali Badakhshan Zohouri (Textile Department, Islamic Azad University, Yazd Branch, Yazd, Iran)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 17 May 2013

354

Abstract

Purpose

In recent years, the textile industry has been required to develop new methods and technologies through introduction of some new materials in various processes rather than employing the same conventional chemicals. The aim of this research was to investigate the changes induced on the cotton fibre by the nanoclay treatment using a pre‐treatment method.

Design/methodology/approach

The fibres were dyed with basic and direct dyes after the nanoclay pre‐treatment. Technical measurements were studied including Fourier‐transform infrared spectroscopy (FTIR), UV‐visible spectrophotometer, differential scanning calorimetry (DSC), thermal degradation analysis (TGA), scanning electron microscopy (SEM), moisture regain measurement (MRM), tensile strength test (TST), reflectance spectroscopy (RS) and fastnesses evaluation.

Findings

The intensity of the major peaks in FTIR spectra of the nanoclay treated sample is in favour of the chemical changes of the cellulose functional groups. Basic dyes showed a higher dyeability on the clay pre‐treated samples compared to raw materials. The results of the colour measurements showed that the more concentration of the clay mineral was used, the darker the colour of the dyed sample was. Some interesting results were obtained in the research.

Research limitations/implications

The nanoclay and a dispersing agent used in the present context were used as received. Besides, the type of the dispersing agent is important for preparation of a colloidal dispersion of nanoclay.

Practical implications

The method developed in this research provides a simple and practical solution for improving the dyeability of cotton with direct and basic dyes.

Originality/value

The method for enhancing the dyeability of cotton is novel and can be used in cotton processing with new properties.

Keywords

Citation

Parvinzadeh Gashti, M., Rashidian, R., Almasian, A. and Badakhshan Zohouri, A. (2013), "A novel method for colouration of cotton using clay nano‐adsorbent treatment", Pigment & Resin Technology, Vol. 42 No. 3, pp. 175-185. https://doi.org/10.1108/03699421311317343

Publisher

:

Emerald Group Publishing Limited

Copyright © 2013, Emerald Group Publishing Limited

Related articles