To read this content please select one of the options below:

Synthesis, characterisation and utilisation of hyperbranched poly (ester‐amide) for the removal of some anionic dyestuffs from their aqueous solutions

M. Abdel Rehim (Packing and Packaging Materials Department, National Research Centre, Cairo, Egypt)
H.M. Fahmy (Textile Research Division, National Research Centre, Cairo, Egypt)
Z.E. Mohamed (Textile Research Division, National Research Centre, Cairo, Egypt)
M.H. Abo‐Shosha (Textile Research Division, National Research Centre, Cairo, Egypt)
N.A. Ibrahim (Textile Research Division, National Research Centre, Cairo, Egypt)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 25 May 2010

334

Abstract

Purpose

The purpose of this paper is to show how to remove some dyestuffs, as pollutants, from their aqueous solutions.

Design/methodology/approach

To achieve the goal, a water soluble hyperbranched poly (ester‐amide) (HBP) was synthesised using the melt polycondensation method by the reaction of maleic anhydride (MA) and diisopropanol amine (DIPA) at 140°C at a molar ratio of 1:1.3 MA: DIPA, respectively. This HBP was incorporated in the preparation of an effective microcrystalline cellulose (MCC)/dimethyloldihydroxyethylene urea (DMDHEU)/HBP adduct by crosslinking HBP with DMDHEU in presence of MCC. Furthermore, the prepared adduct was characterised by investigation its infra red and then utilised in the removal of three anionic dyestuffs from aqueous solutions, namely Irgalan Blau 3GL (an acid dye), SIRIUS Blau S‐BRR (a direct dye) and Levafix Brill Orange P‐GR (a hydrolysed reactive dye).

Findings

The results obtained revealed that the optimum conditions for preparing MCC/DMDHEU/HBP adduct are [HBP], 90 g/l; [DMDHEU], 200 g/l; LR, 1/3.3; [NC4LH], 20 g/l; a time of 30 min and a temperature of 160°C. Moreover, the results also showed that the extent of removal of such dyestuffs from their aqueous solutions by the prepared adduct follows the order: reactive dye>acid dye>direct dye, it is more pronounced at lower than at higher pH values and the removal of each dye by that adduct follows a first‐order reaction.

Research limitations/implications

Other substrates such as chitosan can be used to prepare more effective adducts.

Practical implications

Hyperbranched polymers can be used effectively to prepare ion exchangers capable of removing the pollutants of dyestuffs from their aqueous solutions.

Originality/value

The aforementioned prepared HBP is a novel hyperbranched polymer and could be applied in the removal of many other pollutants.

Keywords

Citation

Abdel Rehim, M., Fahmy, H.M., Mohamed, Z.E., Abo‐Shosha, M.H. and Ibrahim, N.A. (2010), "Synthesis, characterisation and utilisation of hyperbranched poly (ester‐amide) for the removal of some anionic dyestuffs from their aqueous solutions", Pigment & Resin Technology, Vol. 39 No. 3, pp. 149-155. https://doi.org/10.1108/03699421011040776

Publisher

:

Emerald Group Publishing Limited

Copyright © 2010, Emerald Group Publishing Limited

Related articles