TY  - JOUR
AB  - The purpose of this work was to investigate the possibilities for the exploitation of the powder by‐product of oxygen convertor slag from the ferronickel industry as pigment in anticorrosive non‐toxic paints. The chemical composition of the powder shows a large content of Fe3O4 and a high value of pH, two features favouring its use in anticorrosive paints. Paints with this powder, either unrefined or processed, as a pigment and chlorinated rubber resin were produced and tested by the following methods: half‐cell potential, mass loss, chloride diffusion and EIS. The results indicated that protection of steel was achieved to a satisfactory level, especially with the processed material.
VL  - 30
IS  - 2
SN  - 0369-9420
DO  - 10.1108/03699420110381607
UR  - https://doi.org/10.1108/03699420110381607
AU  - Batis G.
AU  - Pantazopoulou P.
AU  - Zagogiannis A.
PY  - 2001
Y1  - 2001/01/01
TI  - Properties of oxygen convertor slag as anticorrosive pigment
T2  - Pigment & Resin Technology
PB  - MCB UP Ltd
SP  - 88
EP  - 94
Y2  - 2024/04/25
ER  -